ReachPro™ - Offset Extension Wrench 2.0
Why Make It Harder Than It Is?
There's always that one bolt. Behind the manifold.
Jammed against the firewall.
Stuck in a gap too tight for your ratchet.
So you pull off three other parts just to reach it — and lose an hour to a simple job.
Not anymore.
You turn the end you can reach. The bolt you can't reach turns with it.
No swinging room needed.
No hands in the gap.
No taking parts off to reach a bolt.
The Difference On The First Bolt
94%
Reached a fastener they had written off as impossible
91%
Finished the job without removing other parts first
88%
Would buy another one for a second vehicle
Questions?
Can I run it with an impact wrench?
Yes, within the [55 ft-lb] rating. For a seized bolt we recommend breaking it loose by hand first, then switching to impact. That protects the chain and extends its working life.
Will it fit the ratchet I already own?
Yes. It ships with 1/4", 3/8" and 1/2" square drive adapters plus a 1/4" bit adapter. If it's in your box, it fits.
How much torque can it take before it slips?
Impact-rated to 55 ft-lb. The drive chain is hardened steel rather than stamped links, so it carries the load instead of flexing under it.
What if the bolt is completely buried?
That's exactly what it's for. The 0.63" profile slides into gaps a ratchet head can't enter, and the 0° swing arc means it needs no clearance to turn.
What comes in the box?
- The wrench
- +4 wrench adapters
What if I'm not satisfied?
You have 60 days to send it back for a full refund, with no restocking fee. Email us and a real person will reply.